FAQ
What is low profile underfloor heating? What are the benefits and drawbacks of thin-layer underfloor heating systems?
sellUnderfloor heatingsellPlanning
The term low profile underfloor heating refers to extremely flat underfloor heating systems that do not require a heating screed and can therefore be realised with installation heights of 20 mm or less. There are specific advantages and disadvantages associated with thin-layer systems which determine the areas in which they can be used.
Benefits
- Due to the low installation height, thin-layer systems can be retrofitted on the existing floor surface. The installation height is below the height of door thresholds in old buildings, for example. Thermal insulation is only required for floors that do not have minimum thermal insulation. The design considerably reduces the work involved in retrofitting underfloor heating.
- The position of the heating pipes directly under the floor surface enables particularly rapid heating behaviour with even heat distribution.
- The low flow temperatures ensure noticeable savings in heating costs.
- The absence of an additional heating screed and the low weight of the thin underfloor heating reduces the load on the ceiling below.
Disadvantages
- The low height is achieved by using thin heating pipes, which have a comparatively high flow resistance. This limits the length of the heating circuits, which means that in larger rooms, several circuits must be installed that do not differ significantly in length.
- Floor slabs above basements or the ground, which have a high thermal resistance, must also be insulated. This cancels out the advantage of low installation height. Without thermal insulation, the heat output of a low profile underfloor heating system in energy-saving mode may not be sufficient to dissipate enough heat into the room in the case of external floor slabs.
- The levelling compound must not be applied too thickly so that the heat output can be provided close to the surface.
