Wall Heating Kit for Retrofitting with Clay Plaster
Natural heating, healthy and relaxed living
The combination of FLEXIRO wall heating with clay plaster enhances the effect of the natural radiant heat of the wall surface heating. Clay absorbs smoke, vapours and pollutants, even in thin plaster layers: properties that perfectly complement the low-circulation and therefore allergy-friendly principle of wall heating.
Our plaster wall heating kit can also be retrofitted to walls with lime or gypsum plaster. As with the other FLEXIRO complete kits, coordinated components, installation grids, plug-in connections and RTL valves for connection to the existing heating system ensure a high level of heating comfort with minimal installation effort. In short, the perfect solution for cost-effective retrofitting of wall heating using ecological construction methods.
- Technical data sheet plaster wall heating kitHeating capacity and other technical information218 KB
- Installation Guide - How to Install a Wall Heating Kit, PlasterComprehensive installation guidelines with all required information to retrofit a radiant wall heating with lime, gypsum or clay plastering methods.1 MB
forum
For the FLEXIRO wall heating dry construction, a standard gypsum plasterboard 12 mm thick is used. For damp rooms, dry construction recommends an impregnated gypsum plasterboard GKBI. Please ask for a customised offer.
Yes, the FLEXIRO wall heating can be mounted on an exterior wall. However, the exterior wall should have a maximum U-value of 0.30 W/m2K. If insulation is installed behind the wall heating to minimise heat loss to the outside, a building physics check of the construction may be required to prevent condensation in the wall when the wall heating is not in operation. During operating, the wall heating will dry-heat the affected wall rather than causing moisture damage to the construction.
After installing the drywall panels, you can visualise the arrangement of the heating pipes in heating mode with a thermal imaging camera. The pipes have a distance of 100 mm. In this way, pictures can also be hung later. Alternatively, if the walls are not tiled, you can spray them slightly damp when the heating is on. Where a heating pipe runs, the moisture will dry off more quickly.
FLEXIRO meets the Trusted Shops quality criteria
- Certified since 2013
- 30 days buyer protection through Trusted Shops
- More than 250 positive reviews