Everything You Need to Install a Radiant Heating System | Heating Kits, Accessories and Tools

Hose fitting for connecting the underfloor heating and pressure test pump during the pressure test before commissioning

Straight plug connector for the secure and fast connection of two pipe ends of the 10 mm PE-RT multilayer pipe

Dowel hook 6 mm (10 pcs.) for fastening the plastic pipes of underfloor heating systems

Fibreglass mesh tape to reinforce joints between underfloor heating insulation boards

Angle connector for the right-angled, fast, and secure connection of two pipe ends of the 10 mm PE-RT heating pipe

Connection piece for simple and quick installation of the heating pipes by clamping ring/Euro cone screw connection

Tool for precisely cutting the 10 mm plastic pipe.

Protective caps for the connections to a radiator of the Kompabox RTL

Impact-resistant thermal insulation boards to accelerate heat-up time of underfloor heating installations especially in bathrooms or other damp rooms

Compression fitting (soft sealing) for copper or precision steel pipe - 15 mm

Compression Fittings for copper or precision steel tubes. For connection to conventional heating systems 

Contact thermostat for temperature limitation - for safe operation below the permissible maximum temperature

High performance adhesive tape double-sided 25 m roll

Compression Fitting for Composite Pipe - 16×2 mm

Compression Fitting for Plastic Pipe - 18×2 mm

Compression Fitting for Plastic Pipe - 16×2 mm

External Bending Spring for Bending Multilayer Composite Pipes

Demounting tool for easily releasing plug-in connections for the FLEXIRO heating pipe

Compression Fitting for Plastic Pipe - 14×2 mm

Compression Fitting for Plastic Pipe 20×2 mm. Connection to the existing heating system

Pipe Shears for precise cutting of plastic pipes with Ø 4-28 mm.

Edge insulation strip with welded PE foil flap for a clean installation of underfloor heating systems

Service valve for regulating or shutting off the water flow with simple plug-in installation without tools

Adjustable extension to connect a bathroom radiator or heated towel rails to the Kompabox RTL 

5-layer polyethylene RT pipe for low profile warm water underfloor heating and other radiant heating systems. Flexible and diffusion-tight according to DIN 4726. 

The multi-layer composite pipe consists of cross-linked polyethylene and has an aluminium layer that prevents oxygen diffusion

Handy quality pipe shears for the precise and fast cutting of PE-RT heating pipes up to ∅ 35 mm

Flush-mounted cabinet for the installation of a mini distributor

Thermostatic valve to connect a bathroom radiator or heated towel rails to the Kompabox RTL. Angled version suitable for radiators fitted with a middle connection

Proven and precise manual pressure test pump for pressure and leak testing of FLEXIRO radiant heating systems.

Pressure test pump as a kit with the required hose connector

RTL control box for connecting a radiant heating system to a conventional heating systems with high flow temperatures of up to 70°C. Direct connection of an extra bathroom radiator or a heated towel rail

DIY low profile underfloor heating kit for retrofit installation in bathroom, living room, old building, etc. 4 kit sizes to choose from. RTL control boxes and connections to all common heating systems.

RTL valve for connection to both conventional heating systems and radiant heating systems. Thermostatic head for hydraulic balancing. Flow shut-off and vent valve. Can be upgraded for smart home use

DIY kit for retrofitting a radiant wall heating with plastering method. The kits are designed for clay, lime or gypsum plaster. 4 kit sizes to choose from. Connection boxes for all common heating systems.

DIY kit for retrofitting a radiant ceiling heating using plaster. The kits are designed for clay, lime or gypsum plaster. RTL-Boxes for connection with all common heating systems.

DIY kit with prefabricated panels for retrofitting a radiant ceiling heating system in drywall construction. 4 kit sizes to choose from. Connection boxes for conventional and radiant heating systems.

DIY kit with prefabricated elements for retrofitting a wall heating system in drywall construction. 3 kit sizes to choose from. Connection boxes and temperature control for all common heating systems.

Underfloor heating with milled OSB boards for flexible installation of the 10 mm PE-RT heating pipe. 4 kit sizes with RTL connection box.

Underfloor heating as a drywall DIY kit with milled gypsum fibre boards and inlet plate for the 10 mm PE-RT heating pipe. 4 set sizes to choose from.

DIY kit with prefabricated plasterboard for retrofitting a copper pipe ceiling heating system in drywall construction. 4 kit sizes to choose from. Connection boxes for conventional and panel heating systems.

DIY wall heating kit with prefabricated elements for high heating performance. RTL-Boxes for connection to all common heating systems.