New
Sale
Ceiling Heating Kits for Clay, Lime or Gypsum Plaster
Other Products
New
Sale
New
Sale
New
Sale
New
Sale
New
Sale
New
Sale
New
Sale
Ceiling Heating kit for Clay Plaster, Lime Plaster or Gypsum Plaster
Retrofitting a naturally healthy room climate
The FLEXIRO water-bearing ceiling heating kit allows the ceiling to be used as a heating surface. It is installed using special honeycomb elements into which a 10 mm PE-RT composite pipe is inserted. This results in a low installation height of 11 mm and, depending on the thickness of the plaster layer, relatively high heating outputs. The low height enables installation in rooms with low ceilings.
Clay, gypsum or lime plasters that are suitable for surface heating are used. The kit includes an RTL valve for connection to conventional heating systems. Special plug-in connections for the heating pipe allow easy installation with few tools.
Plaster ceiling heating is always the right choice when users are familiar with plastering techniques and high heating outputs are required. The use of natural materials such as clay helps to create a healthy indoor environment by improving humidity control and providing even, dust-free radiant heat. Ceiling cooling is also possible with the system.
O.FR.DH.P
forum
Yes, it is possible to use the ceiling heating kit for cooling in summer. Sufficient cool water supply is required though. Further details can be found at: How to use a ceiling heating as cooling ceiling.
If there is an unheated room above the ceiling activated with FLEXIRO and the old ceiling has no thermal insulation or the heat transfer coefficient of the ceiling is unknown, we recommend adding an additional insulation layer. In any case, thermal insulation above the ceiling heating will shorten the reaction time of the heating.
The substructure for the ceiling heating should comply with the dry construction guidelines for suspended ceilings. When using CD profiles and direct hangers, a suspension height of approx. 5 cm can already be sufficient. A small distance to the raw ceiling is also required for the installation of the FLEXIRO connection pipes and plug connections. The dry construction guidelines also permit the use of wooden beams as a substructure for the plasterboard. However, their stability and torsional stiffness is usually less good compared to CD profiles made of metal.
FLEXIRO meets the Trusted Shops quality criteria
- Certified since 2013
- 30 days buyer protection through Trusted Shops
- More than 250 positive reviews
How to turn a FLEXIRO ceiling heating system into a cooling ceiling in the summer trending_flat 4 Possible solutions
- What water cooling options can be considered?
- What cooling capacity can be expected?
- How can the chilled ceiling be controlled?
We provide answers to the most important questions when retrofitting a cooling ceiling.